Cpk Notes: Definitions & Explanations PDF | Download eBooks
Study Cpk lecture notes PDF with total quality management definitions and explanation to study What is Cpk?. Study cpk explanation with TQM terms to review total quality management course for online MBA programs.
Cpk Definition:
A process capability ratio that takes process centering into account is called Cpk.
Introduction to Statistical Quality Control by Douglas C. Montgomery
Cpk Notes:
Process capability ratio Cp does not consider the process mean in the calculation. However it is important to also consider the process mean and determine the location of the process mean relative to the defined specification limits. In order to incorporate the process mean in the calculations, another process capability ratio can be used which is denoted by Cpk. Cpk considers one-sided process capability ratios i.e. difference of process mean from upper specification limit divided by 3 sigma (Cpu) and difference of lower specification limit from process mean divided by 3 sigma (Cpl). The minimum of these two one-sided capability ratios give Cpk. When the value of Cp is equal to Cpk, it means that the process is centered on the mean. But when the value of Cpk is less than Cp, it means that the process is off-centered.
Keep Learning with TQM Notes
What is Gap Analysis?
Whenever there are gaps within a process or a system, they must be identified. The process by which gaps are ...
What are Control Charts?
Control charts are also called process control charts or process charts. These are used to monitor a process to ensure ...
What is Multiple Stream Process?
There are some situations when the data regarding a process is measured from different sources. The type of process which ...
What is Services Blueprint?
The concept of service blue print was developed by Lynn Shostack, CEO of Joyce International, Inc. There must be several ...
What is Downtime?
If an organization works an 8-hour shift, the available time of production is 8-hours. However, the equipment, and workers are ...
What is Operating Characteristics Curve?
When percent defective of different lots are known or assumed, the probability of acceptance of the lots can be determined ...
